XLPE Insulated and PVC Sheathed Control Cable

This product is suitable for power distribution devices with rated voltages of 600/1000V or lower.

I. Applicable Conditions

1. Laying temperature and minimum bending radius: when the laying temperature of the cable is no longer lower than 0 °C, no pre-heating is required: the cable laying is not limited by the drop height, and the minimum bending radius during laying is as follows:

a. Not less than 6 times the outer diameter of the cable for non-armored cables

b. Not less than 12 times the outer diameter of the cable for armored or copper-tape shielded cables

c. Not less than 10 times the outer diameter of the cable for shielded flexible cables

2. The long-term allowable operating temperature of the cable conductor is 90 ° C

3. In the case of a short circuit, the maximum temperature of the cable conductor does not exceed 250 °C, and the duration does not exceed 5s.

II. Types and Names